Magdrill Lynx K

The Rotabroach Lynx is a semi-automatic magnetic drilling machine on which the operator can choose between automatic and manual control. The feed rate is adjustable. The motor delivers 1100 W and draws 10.8 A at 110 V and 5.4 A at 230 V. The spindle runs at a speed of 620 rpm. The model designation is CM/800/1A for 110 V and CM/800/3A for 230 V.

The capacity is stated separately for the two feed modes: with manual feed, the Lynx drills holes of 35 mm diameter to a depth of 50 mm, and with automatic feed, 35 mm holes to a depth of 45 mm. With twist drills, the capacity is 13 mm diameter to a depth of 110 mm, and the machine is supplied with a 13 mm drill chuck. The spindle bore is 19.05 mm (3/4"). Cutting fluid is fed automatically during drilling.

The machine is 417 mm high, 230 mm wide and 270 mm long, and weighs 16.5 kg. The manufacturer gives the magnet's holding force as 1500 kg. Electronic overload protection is the safety feature the manufacturer specifies for the machine.