Swepac SVM 25

Swepac SVM 25E is an electrically driven modular truss screed for surface and deep vibration of fresh concrete surfaces. The screed is made up of sections in strong, lightweight aluminium and can be assembled to a total length of up to 25 metres. The modules are available in lengths of 0.5, 0.75, 1, 2 and 3 metres and weigh 22, 24, 26, 42 and 64 kg respectively, so the screed can be adapted to the width of the pour. The screed can be angled up to 6 degrees between sections.

The drive unit has a 400 V three-phase 2.2 kW motor with a speed of 2830 rpm and protection rating IP 65. The vibration shaft is made of stainless steel, and the high-quality bearings have grease nipples set flush with the frame for protection. Both the electrical system and the fuses are vibration-protected. The screed vibrates down to a depth of approx. 150 mm, and with skids fitted it can be run directly on the reinforcement. The SVM 25P is the sister model with a 4.8 kW Honda GX200 petrol engine and a 3.1-litre fuel tank.

A manual winch is included as standard, and an electric winch kit can be ordered as an accessory so that one person can operate the screed alone. For long screeds, an additional third winch is available. Both the drive unit and the end section have pull-out handles. Other accessories include skids with stepless adjustment from 30 to 150 mm, outrigger U2 or U3, a 0.5-metre extension, a separate coupling kit for steeper slopes and fixed rail support on request.