Häny HCM 100 mixer

Häny HCM 100 is a colloidal mixer (high shear mixer) particularly suitable for producing suspensions of water, cement, finely ground binder, bentonite, sand and other materials. The high-speed TMP 9 mixing pump creates high turbulence and gives a very good mixing result. According to Häny, a robust mixing tank combined with highly wear-resistant materials in the mixing pump gives a long service life and reliable operation.

The mixer has a usable capacity of 100 litres and a mixing capacity of approx. 2 m³/h at a w/c ratio of 1, with a circulation capacity of 540 l/min and a maximum aggregate size of 5 mm. The liquid temperature can be up to 40 °C. The tank has a conical bottom and a recirculation line, and a lubricated three-way valve is used to switch between mixing and transfer. The shaft seal is lubricated automatically. The water connection is BSP ¾". The electric motor is 3.0/3.6 kW (3x 400/460 V, 50/60 Hz) with a nominal current of 6.15/6.45 A and a speed of 1440/1695 min⁻¹. It weighs approx. 130 kg and measures 814 x 675 x 1335 mm (L x W x H).

The HCM 100 can be used as a stand-alone unit or together with an agitator and grout pump, and according to Häny's product portfolio it is part of the IC 310, IC 311 and IC 325 compact plants together with the HRW 150 agitator. Optional equipment includes a ¾" water meter with manual shut-off, an automatic ¾" water meter with adjustable counter for accurate water dosing, and an additional mixing unit (3x 400/460 V, 50/60 Hz, 3.0/3.6 kW) for w/c ratios below 0.5 and microcement.