Turbosol Apemat

Apemat 190 is a mixing and conveying machine for levelling and screed work, driven by a 1-phase 2.2 kW electric motor that connects directly to ordinary household power. The material is mixed in a certified 190-litre pressure vessel with directional, wear-resistant mixing blades and wear parts, and is then propelled by compressed air. Each cycle gives 140–160 litres of material, and the machine delivers up to 80 metres horizontally and 40 metres vertically. The site's own compressor with an air flow of 2 400–5 000 l/min at 6 bar is used as the air supply and is not included with the machine.

Apemat is used for traditional and insulating levelling compounds, mortar, sand, plaster, micro-concrete and concrete. The machine is designed for screeding work in new buildings and for renovation and maintenance of flats and apartment blocks. With Apemat there is no need to set up mortar mixers, hoists and scaffolding, and manual transport of material inside the building is eliminated. This means faster progress and lower labour costs on the job.

The machine is supplied in three versions. The E is filled manually, has a filling height of 85 cm, 13–16 cycles per hour and weighs 400 kg. The EB has a 190-litre loading bucket, a filling height of 41 cm, 18–20 cycles per hour and weighs 520 kg. The EBP has both a loading bucket and a scraper shovel, gives 18–22 cycles per hour and weighs 590 kg. The undercarriage has an articulated towbar and pneumatic tyres. The max. aggregate size is 20 mm with a Ø 65 mm hose and 12 mm with a Ø 50 mm hose. The lid has an air relief valve, and the control panel with lever for the loading bucket is easy to use.