Turbosol Beton Master

Beton Master Stage V is a hydraulic piston pump with two cylinders and an S-valve, designed for pumping concrete and micro-concrete and for spraying concrete. The capacity can be adjusted steplessly from 2 to 15 m³/h, and the machine works with up to 80 bar material pressure. The pump cylinders are Ø 120 mm with a 700 mm stroke length and up to 30 strokes. Concrete is pumped up to 200 metres horizontally and 100 metres vertically; the figures are theoretical and cannot be reached at the same time. Beton Master is a reliable alternative to conventional truck-mounted concrete pumps, especially where access is difficult.

The machine is used for concrete, grout, structural and refractory mortar, self-levelling floor compounds, ground improvement, micropiles, compaction grouting and shotcrete. It is supplied in two versions: a pumping version with concrete grid, steel pipes and rubber hoses Ø 100, and a spraying version with a 15 mm mesh grid, reducer cone from Ø 100 to Ø 50, rubber hose Ø 50 and spray nozzle Ø 50. The hopper holds 250 litres and has a filling height of 135 cm. For spraying, the machine can be fitted with a dosing pump for admixture. The range of accessories includes wireless remote control, Victaulic couplings and bends.

The power source is a liquid-cooled Yanmar 4TNV88C-DYI2D four-cylinder diesel engine of 35.5 kW (48.3 hp) that meets EU Stage V and gives lower fuel consumption than the previous engine package. On request, the machine can be supplied with a 22 kW, 400 V, 50 Hz electric motor. It is operated from an intuitive panel with a multicolour LED display showing consumption, engine speed, operating temperature, oil pressure and operating hours. The engine and main components are accessed through side doors, and the machine has a single lifting eye. The undercarriage is supplied with a manual towbar and fixed axle with pneumatic tyres, or as a road-approved trailer with brakes and suspension.