Turbosol GIOTTO

Giotto is a 3-phase plastering machine that doses, mixes, pumps and sprays dry mortar and pre-mixed plasters from bags or silos. The machine body is modular and built in bent steel plate, and it is driven by an efficient geared motor. The motor power is 5.5 kW for the plastering pump and 0.5 kW for the cell dosing hopper, and the machine connects to 400 V with 24 V control voltage. The theoretical capacity is 30 l/min at up to 40 bar working pressure, and the material is delivered up to 40 metres horizontally and 15 metres vertically. The standard screw pump is the D 6.3.

The machine is used for interior gypsum and gypsum-lime plaster, for exterior coatings of lime, lime/cement, ETICS and insulating plaster, and for self-levelling floor compounds. The max. aggregate size is 3 to 5 mm depending on which pump unit is selected. Giotto has a built-in 250 l/min (0.82 kW) diaphragm compressor and a 60 l/min (0.80 kW) water pump. The hopper holds 110 litres and has inclined cell dosing, the filling height is 99 cm and the delivery pipe is Ø 25 mm. The machine measures 115 × 65 × 147 cm and weighs 250 kg.

The wear parts are universal and can be swapped between the machines in the series, and Turbosol offers several interchangeable pump units – D4 MV, D6.3, D7 2.5, D8 1.5 and D8.2 – which are selected according to material type and aggregate size. The machine can be dismantled into four parts, which makes both maintenance and transport between floors easier. The main components are easily accessible. Accessories include the D35 plastering gun, a spray gun for pre-mixed plaster, deflectors from 7 to 16 mm, pressure gauge, mixer for lightweight materials, standard mixer, turbo mixer, cover and cleaning sponge Ø 60 mm.