Turbosol Transmat 27.45

The Transmat 27.45 Stage V is a mixing and pumping machine for levelling compound, mortar and concrete, with its own diesel engine and built-in compressor. The engine is a four-cylinder Yanmar 4TNV88C-DYI2D rated at 35.5 kW (48.3 hp) that meets EU Stage V, and the Rotair-Turbosol compressor delivers 4,500 l/min at 6 bar. Because the machine supplies its own compressed air, no external compressor is needed on the construction site. It is supplied in three versions: DC with manual filling, DCB with loading bucket and DCBP with loading bucket and drag scraper. A road-going undercarriage with brakes and suspension can be supplied on request.

The pressure vessel holds 270 litres and produces 200–220 litres per cycle. The DC runs 14–16 cycles per hour, the DCB 20–22 and the DCBP 22–24. The conveying distance is 180 metres and the conveying height 120 metres, stated as theoretical values that cannot be achieved at the same time. The maximum aggregate size is 20 mm with the standard Ø 65 mm hose, 12 mm with Ø 50 mm and 30 mm with Ø 90 mm. The fuel tank holds 50 litres. The filling height is 97 cm on the DC and 36 cm on the models with loading bucket, and the loading bucket holds 270 litres.

The machine is designed for semi-dry floor screeds, mixes with little cement or water, insulating screeds with expanded clay, polystyrene, perlite, vermiculite or cork, as well as fine concrete and concrete with aggregate up to 30 mm. The mixing shaft has automatic two-speed drive with reverse for faster, more even mixing, and the hopper is fitted with a bag cutter. The control panel has a multicolour LED display showing consumption, engine speed, compressor pressure, operating temperature, oil pressure, operating hours and the number of working cycles. The vessel has a protective grille that stops the mixer automatically, durable wear plates, a powerful LED work light, an extra air outlet and an optional automatic lubrication system.