Turbosol POLI T

Turbosol POLI T is a modular, electrically driven screw pump for pumping, spraying and injecting standard and special mortars. The machine can be assembled with different components depending on the job to be done, and if it is supplied with a planetary mixer, it becomes a complete mixing and pumping plant. The standard pump is a 2L6 screw pump with flexible coupling, which gives 8–45 l/min and a working pressure of 25–40 bar for aggregate sizes up to 6 mm. With the T25 pump, the capacity increases to 8–55 l/min and the max. aggregate size to 8–10 mm at 15–30 bar. The delivery distance is up to 60 m and the delivery height up to 40 m.

POLI T is used for standard and pre-mixed masonry mortars, rough-coat plaster as well as traditional, pre-mixed and insulating plaster, concrete repair mortar, thin-coat plaster and textured coatings, lightweight mortar and self-levelling floor compounds. It is also suitable for injecting cement slurry under controlled pressure, geothermal injection and grouting, adhesive and anchoring mortar, pressure pointing, floor raising and fire protection. The manufacturer offers a wide range of accessories, including spray guns for finishing plaster and traditional mortar, pressure pointing guns, an injection gun with pressure limiter, deflectors, a pressure gauge and a vibrating screen.

The machine is easy to handle thanks to its low weight and a chassis with pneumatic tyres. The 120-litre hopper has an agitator and safety grid, a large emptying hatch and a single central lubrication point, which simplifies cleaning and maintenance. The controls are grouped in one place. The external 592 l/min three-phase compressor (3 kW, 400 V) is intended for thin-coat plaster. POLI T is available in two versions: POLI T EV/MP with planetary mixer and POLI T EV with vibrating screen and T25 pump. The machine weighs 250 kg without a mixer and 395 kg with one.