Turbosol T20X

The Turbosol T20X is a hydraulic screw pump with a liftable mixer for premixed and traditional plastering mortars. The machine has a closed hydraulic circuit and is designed for mixing, pumping, spraying and injecting standard, premixed, insulating and special mortars. It is powered by a liquid-cooled 3-cylinder Kubota D1105 diesel engine rated at 16.3 kW (Stage V), with new sound insulation for quiet operation, and according to the manufacturer the hydraulic circuit with variable displacement pump delivers high performance with lower fuel consumption.

The standard pump unit is the 2L6, which delivers 0–55 l/min at up to 40 bar for aggregate sizes of 4–6 mm, with a reach of up to 100 m horizontally and 60 m vertically. With the T25 pump, capacity increases to 6–70 l/min and aggregate size to 8–10 mm at 30 bar. The 2L6, T25, 2L6+++ and 2L7 pump units are easily interchangeable to suit the job. A built-in 2-cylinder compressor delivering 400 l/min at 7 bar supplies air for spraying. Applications include traditional and premixed mortars, insulating and fire-retardant mortars, thixotropic mortars, single-coat plaster, concrete repair, micropiles, grouting and self-levelling floor compounds.

The large, hydraulically liftable 240-litre mixer has a low filling height (85 cm), and the hopper holds 250 litres. The machine has a support foot and a special double-layer cover. The control panel is electromechanical and user-friendly, with a protective lid. The engine compartment gives easy access to the mechanical parts, and the wide emptying hatch makes the pump and mixer easy to wash. The T20X sits on an unbraked chassis for road transport, measures 283 x 148 x 121 cm (320 cm in towing position) and weighs 750 kg.