Turbosol GIOTTO-MONO

Giotto Mono is a 1-phase plastering machine that doses, mixes, pumps and sprays dry mortar and pre-mixed plasters from bags or silos. The machine body is of modular construction in bent steel plate, and the drive consists of an efficient geared motor with a three-speed frequency converter. The wear parts are universal and can be swapped between the machines in the series. The capacity is 13, 16 or 18 l/min depending on the selected speed, the max. aggregate size is 4 mm and the max. working pressure 40 bar. The material is delivered up to 20 metres horizontally and 10 metres vertically.

The machine is used for interior gypsum and gypsum-lime plaster, exterior coatings of lime, lime/cement, ETICS and insulating plaster, as well as self-levelling floor compounds. The screw pump is a Turbosol D5 2.5 Eco. The machine has a built-in 210 l/min (0.52 kW) diaphragm compressor and a 45 l/min (0.37 kW) water pump. The hopper holds 110 litres, the filling height is 99 cm and the delivery pipe is Ø 25 mm. The control voltage is 24 V, and the machine connects to an ordinary 230 V 1-phase power supply.

The modular design means that Giotto Mono can be dismantled into four main parts. This cuts transport and set-up costs and makes it possible to get the machine in even on building sites with restricted access. The frequency converter keeps power consumption low and lets the machine work even on a weak power supply, and the spraying rate can be adjusted during the job. All components are easily accessible for maintenance. The machine measures 115 × 65 × 147 cm and weighs 247 kg. Accessories include a spray gun for pre-mixed plaster, deflectors from 7 to 16 mm, a pressure gauge, lightweight, standard and turbo mixers, and a cleaning sponge Ø 60 mm.