Turbosol Mini Avant

Mini Avant is a single-cylinder piston pump for pumping, conveying, injecting and spraying standard, pre-mixed and special mortars. The special pump design gives an even and continuous spray pattern, and the pump handles aggregate sizes up to 6 mm. This gives high efficiency, low maintenance costs and low energy consumption. According to the manufacturer, one piston pump can apply over 30 000 m² of plaster with an average thickness of 2 cm. Hoses of up to 50 metres can be connected, and the max. working pressure is 15 bar.

The machine is supplied in four versions. The 1-phase version has a 2.2 kW motor at 230 V, the 3-phase version has 2.2 kW at 400 V, Vario has a 230 V motor with electronic flow control from 2 to 30 l/min, and Mini Avant G has a 3.3 kW (4.0 hp) Honda petrol engine with recoil start. The electric versions deliver 24–30 l/min, 40–50 metres horizontally and 12–15 metres vertically, while the G version reaches 50–60 metres and 15–18 metres. All versions have a 220 l/min compressor, a 140-litre hopper and a Ø 35 mm delivery pipe.

Applications include spraying traditional rough-coat plaster, pumping standard and pre-mixed mortar, applying plaster and special mortar for concrete repair and renovation, and pumping self-levelling floor compounds. With a kit for pre-mixed plaster, the machine can also spray finishing plaster and apply lightweight insulating materials. The Vario version is also used for filling and pressure pointing of open masonry, pressure pointing on prefabricated structures, thin-coat plaster and injection of cement slurry under controlled pressure. The hopper has smooth, deposit-free surfaces that are easy to wash, and safety sensors stop all moving parts when the vibrating screen or cover is opened.