Turbosol Pro DM

Turbosol PRO H DM is a plastering machine with a worm pump and hydraulic system for mixing, pumping, spraying and injecting standard mortar and pre-mixed mortar. The machine offers high working capacity thanks to the robust 180-litre tilting mixer, the large 200-litre hopper and steplessly adjustable capacity. Applications include traditional site-mixed mortar and pre-mixed dry mortar, insulating and fire-retardant mortar, thixotropic mortars, single-coat plaster, plaster, concrete repair, micropiling, screed repair, grouting and self-levelling screeds.

The machine is powered by a liquid-cooled diesel engine, a 15 kW Lombardini 12LD/477/2, and has a built-in 2-cylinder compressor delivering 400 l/min at 7 bar. The version for traditional mortar uses the T25 worm pump with a capacity of 0–65 l/min, max. aggregate size 10 mm and maximum working pressure 30 bar. For pre-mixed plaster, the 2L6 pump is used, with 0–55 l/min, max. aggregate size 6 mm and 40 bar. The outlet manifold is Ø 50 mm, and the filling height of the mixer is 145 cm.

The innovative hydraulic circuit with a variable displacement pump uses only the amount of oil required for the desired output. This gives fuel savings of up to one litre per hour, a smaller oil volume in the circuit and better working conditions for the engine. The reach is up to 80 metres horizontally and 40 metres vertically with traditional mortar, and up to 100 metres and 60 metres with pre-mixed plaster. The undercarriage is unbraked for road use, the machine measures 274 x 139 x 145 cm (339 cm in towing position) and weighs under 750 kg.