Turbosol Pro H BMS

Turbosol PRO H BMS is a diesel-powered hydraulic screw pump with mixer, developed for mixing, pumping and spraying large quantities of material over great heights and distances. The machine has a two-speed hydraulic motor and can be fitted with two different pump units:

• L8.2: aggregate size up to 16–18 mm and capacity up to 300 l/min at 20 bar
• 2L7: finer materials up to 8 mm, 30 bar working pressure and a reach of up to 140 m horizontally and 80 m vertically

According to the manufacturer, the machine can deliver up to 18 cubic metres of material per hour.

Applications include structural mortar and cement slurry, self-levelling floor compounds, grout and concrete, grouting of pressure micropiles as well as shotcrete, plaster, refractory mortar and fibre-reinforced mortar. With two steplessly adjustable speeds, two pump units, a built-in 400 l compressor and a large 200-litre mixer, the PRO H BMS is self-sufficient on the building site. The tilt-up mixer has wear-resistant mixing paddles, and the hopper holds 200 litres with a filling height of 86 cm.

The machine is powered by a liquid-cooled 18.8 kW Kohler KDW 1404 diesel engine (Stage V). According to the manufacturer, the special Hydrotronic hydraulic system with variable displacement pump reduces fuel consumption by up to 1 litre per hour. The controls are simple and easily accessible. The safety equipment includes an emergency stop, sensors that protect the diesel engine and automatic stop when the cover, hopper grid or mixer grid is lifted. The PRO H BMS is built on a chassis with sprung axle and towbar, measures 321 x 176 x 120 cm and weighs 870 kg.