Skip to content
Falköping HighEnergySalting
FalköpingFalköping·Falköping C-7HES spreader for hot-water salting

HighEnergySalting

Volume
70 hl
Heating output
80 kW
Weight
2200 kg
Spreading material
Salt

The Falköping C-7HES is a spreader for hot-water salting (High Energy Salting) with a volume of 70 hl, spreading width 2–8 m and hydraulic drive. Ground-speed dependent and prepared for data collection.

  • Salt wetted with 95 °C hot water acts faster and more effectively
  • Reduced salt consumption and a wider temperature range
  • 7.0 m³ volume for sand/salt and 2.1 m³ liquid tank (C-7 HES)
  • Heating output 80 kW, heating time 9 minutes
  • One spreading disc; hydraulic drive from the truck, engine drive as an option
  • Also available for shorter body lengths
Call 23 26 78 00
See HES at Falköping (further down the hot-water spreaders page)
Per Ingar Haug
Per Ingar Haug
Product manager · Road maintenance, Falköping

About HighEnergySalting

The Falköping HES (High Energy Salting) is a disc spreader for trucks in which the salt is wetted with 95 °C hot water at the moment of spreading. Heating the wetting water makes the salt act faster and more effectively, widens the usable temperature range and reduces salt consumption, resulting in better overall economy and less environmental impact. Falköping refers to the report “Salt befuktet med varmt vann” from Statens vegvesen (the Norwegian Public Roads Administration) as documentation of the method.

The C-7 HES has a 7.0 m³ volume for sand/salt and a 2.1 m³ liquid tank, and weighs 2200 kg. The heating output is 80 kW, with a heating time of 9 minutes to 95 °C. The spreader has one spreading disc and as standard is driven by the truck's hydraulics; engine drive is available as an option, and the spreader can always be driven by the truck hydraulics even if engine drive is fitted. A larger C-9 HES with 9.0 m³ and 2.7 m³ is also available, and the HES can be supplied for shorter body lengths.

The surface treatment is zinc metallising, primer and 2-component topcoat. Optional equipment includes remote-controlled spread pattern, a mixer for salt slurry, hydraulic disc lift, side deflectors and engine drive. The spreader can be equipped with data collection, GPS for automatic road identification and IR automation that doses salt and liquid according to the road surface temperature. The hydraulic disc lift is controlled from the control panel and prevents damage to the disc, and a load-carrier frame allows easy mounting without modifications to the spreader.

More features

  • Zinc-metallised, primer and 2-component topcoat
  • Accessories: data collection, GPS, IR automation, mixer and disc lift

Documents

Spreading methods and equipment

Can spread

  • Dry salt
  • Salt pre-wetted with brine
  • Salt pre-wetted with water
  • Salt pre-wetted with hot water
  • Slurry (fine-grained pre-wetted salt)
  • Sand

Vehicle and mounting

  • 3-axle truck
  • 4-axle truck
  • Tipper body
  • Hook lift
  • Subframe

Feeding and spreading

  • TwinFeed, two discharge augers
  • Hydraulic disc lift
  • Hydraulic cover
  • Agitator
  • Auger relief
  • Extra hard-wearing feed augers in Hardox
  • Mixer for slurry

Hopper and tank

  • Mesh over the material hopper
  • Fold-up railing
  • Extension for more dry material
  • Larger or additional tanks for more liquid

Control and data

  • LS control
  • Data capture
  • GPS-controlled spreading
  • Prepared for forecasting tools (BM-systems, Klimator, Ahead, Vaisala)

Frost-proof. The equipment is optional. We can help you put together what suits the vehicle and the job.

Also known as: hot-water pre-wetting, hot-water salting, sand, spreader, truck spreader, salt spreader, ground-speed dependent, brine, disc spreader, Slurry, Salt slurry, Slurry salt, Mixer, Mixer salt, Salt mixer, Fine-grained pre-wetted salt

Sand and salt spreaders

Related products

All in this category
Falköping fixed-sand spreader
FalköpingFalköping C-7LTFV

Fixed-sand spreader

Falköping fixed-sand spreader C-7LTFV for sand and salt. Volume 70 hl, spreading width 2–8 m, hydraulic drive. Prepared for data collection and available with a mixer for salt slurry.

See product
Falköping liquid spreaders
FalköpingFalköping CLR and CLRK (11–15 m³) and the CLRK-15H nozzle spreader

Liquid spreaders

Falköping liquid spreaders: CLR for load beds and CLRK for hook lifts, with 11–15 m³ of liquid, and the CLRK-15H nozzle spreader. Spreading width 2–8 m (up to 13 m with high-speed nozzles), hydraulic drive, ground-speed dependent and prepared for data collection.

See product
Falköping hydraulic truck spreaders
FalköpingFalköping B-2 series

Hydraulic truck spreaders

The Falköping B-2H and B-2HS are mounted at the rear of the truck and spread sand, fine gravel and salt. Volume 0.2 m³, hydraulic drive. The B-2H is made for a 2.5 m body width, while the B-2HS can be made in any width from 2.1 to 2.6 m. The tractor versions are called B-2HU and B-2HUS.

See product
Falköping combination spreaders
FalköpingCLC combination spreader

Combination spreaders

The Falköping CLC series are combination spreaders that spread liquid and dry material (sand and salt) together or separately. Models CLC-366 to CLC-857 with a spreading width of 2–8 m (up to 13 m with high-speed nozzles) and hydraulic drive.

See product

Need help choosing the right machine?

Get in touch for advice, prices and availability — we respond quickly.

Contact us

Sign up for our newsletter

Get news about machines, promotions and events straight to your inbox.

Which business areas would you like news from?

We only use your email address for the newsletter, and you can unsubscribe at any time. Read more in the privacy policy.