Combination spreaders
- Liquid volume
- 3.6–8.5 m³
- Hydraulic pressure, min.
- 150 bar
- Max. spreading speed
- 60 km/h
- Models
- CLC-366
The Falköping CLC series are combination spreaders that spread liquid and dry material (sand and salt) together or separately. Models CLC-366 to CLC-857 with a spreading width of 2–8 m (up to 13 m with high-speed nozzles) and hydraulic drive.
- For sand and salt
- Spreading width 2–8 m, up to 13 m with high-speed nozzles
- Hydraulic drive
- Emergency operation function
- Infinitely variable and synchronised width and rate setting
- Ground-speed dependent
About the combination spreaders
Liquid and dry together or separately.
Standard equipment: zinc-metallised, primer and 2-component topcoat, cover and quick-loading system.
Optional equipment: choice of control unit, remote control of spread pattern (hydraulic), hydraulic disc lift, ground-wheel drive, engine drive, exhaust heating, frame for hook lift, add-on for high-speed spreading, add-on for dust suppression (airborne dust), mixer for optimal dry/liquid mixing and preparation of slurry, and data collection.
More features
- Quick emptying
- Easy calibration
- Prepared for data collection
- Large unit adapted for tridem trucks
- Spreader for long ranges
- Particularly effective together with e.g. high-speed spreading
- Combination: spreading of liquid and dry material together or separately
- Diaphragm pump and single or double feed auger give very accurate dosing
Documents
- 📄 Mixer and the slurry method (PDF)
- 📄 Older disc spreader brochure (Swedish) (PDF)
- 📄 Disc spreader brochure (Swedish) (PDF)
- 📄 Disc spreader brochure (English) (PDF)
Spreading methods and equipment
Can spread
- Dry salt
- Salt pre-wetted with brine
- Sand
Vehicle and mounting
- 3-axle truck
- 4-axle truck
- Tipper body
- Hook lift
- Subframe
Feeding and spreading
- TwinFeed, two discharge augers
- Hydraulic disc lift
- Hydraulic cover
- Agitator
- Auger relief
- Extra hard-wearing feed augers in Hardox
- Mixer for slurry
- Nozzle spreading of liquid over a greater width and at higher speed
Hopper and tank
- Mesh over the material hopper
- Fold-up railing
- Extension for more dry material
- Larger or additional tanks for more liquid
Control and data
- LS control
- Data capture
- GPS-controlled spreading
- Prepared for forecasting tools (BM-systems, Klimator, Ahead, Vaisala)
The equipment is optional. We can help you put together what suits the vehicle and the job.
Also known as: Sand spreader, sand, spreader, trailer, truck spreader, salt spreader, ground-speed dependent, brine, disc spreader, Slurry, Salt slurry, Slurry salt, Mixer, Mixer salt, Salt mixer, Fine-grained pre-wetted salt, sand gritter
Related products
Liquid spreaders
Falköping liquid spreaders: CLR for load beds and CLRK for hook lifts, with 11–15 m³ of liquid, and the CLRK-15H nozzle spreader. Spreading width 2–8 m (up to 13 m with high-speed nozzles), hydraulic drive, ground-speed dependent and prepared for data collection.
Disc spreader for tractors
The Falköping TC series (TC-05, TC-10, TC-16) are sand and salt disc spreaders for tractors. Volume 0.5–1.6 m³, spreading width 2–8 m and hydraulic drive.
HighEnergySalting
The Falköping C-7HES is a spreader for hot-water salting (High Energy Salting) with a volume of 70 hl, spreading width 2–8 m and hydraulic drive. Ground-speed dependent and prepared for data collection.
Disc spreaders for smaller vehicles
Falköping C-06, C-1, C-1.5 and C-2 are sand and salt disc spreaders for smaller vehicles, with volumes from 0.6 to 2 m³ and a spreading width of 2–8 m. The C-2MB is adapted for the Mercedes MB-Trac.
Need help choosing the right machine?
Get in touch for advice, prices and availability — we respond quickly.