Falköping
Sand and salt spreaders — 50 years of partnership.
Sigurd Stave Maskin AS has sold Falköping spreaders in Norway since 1961.
Sand and salt spreaders
Falköping K-60 wheelbarrow spreader
Manual gritting cart for sand, fine gravel, salt and calcium chloride. The Falköping K-60 holds 60 litres, spreads 0.6 m wide and doubles as a wheelbarrow.
Disc spreaders with pre-wetting
Falköping C-3, C-5, C-6 and C-7 disc spreaders with pre-wetting. Volume 3–7 m³, spreading width 2–8 m, hydraulic drive.
Disc spreaders, dry
Falköping C-3, C-5, C-6 and C-7 disc spreaders for dry salt and sand. Volume 3–7 m³, spreading width 2–8 m, hydraulic drive.
Combination spreaders
The Falköping CLC series are combination spreaders that spread liquid and dry material (sand and salt) together or separately. Models CLC-366 to CLC-857 with a spreading width of 2–8 m (up to 13 m with high-speed nozzles) and hydraulic drive.
Liquid spreaders
Falköping liquid spreaders: CLR for load beds and CLRK for hook lifts, with 11–15 m³ of liquid, and the CLRK-15H nozzle spreader. Spreading width 2–8 m (up to 13 m with high-speed nozzles), hydraulic drive, ground-speed dependent and prepared for data collection.
HighEnergySalting
The Falköping C-7HES is a spreader for hot-water salting (High Energy Salting) with a volume of 70 hl, spreading width 2–8 m and hydraulic drive. Ground-speed dependent and prepared for data collection.
Fixed-sand spreader
Falköping fixed-sand spreader C-7LTFV for sand and salt. Volume 70 hl, spreading width 2–8 m, hydraulic drive. Prepared for data collection and available with a mixer for salt slurry.
Disc spreaders for smaller vehicles
Falköping C-06, C-1, C-1.5 and C-2 are sand and salt disc spreaders for smaller vehicles, with volumes from 0.6 to 2 m³ and a spreading width of 2–8 m. The C-2MB is adapted for the Mercedes MB-Trac.
Hydraulic truck spreaders
The Falköping B-2H and B-2HS are mounted at the rear of the truck and spread sand, fine gravel and salt. Volume 0.2 m³, hydraulic drive. The B-2H is made for a 2.5 m body width, while the B-2HS can be made in any width from 2.1 to 2.6 m. The tractor versions are called B-2HU and B-2HUS.
Towed spreaders
Falköping LB-1000 series – towed spreader for trucks. Volume 1.0 m³, for sand and salt, spreading width 2.4–2.7 m.
Disc spreader for tractors
The Falköping TC series (TC-05, TC-10, TC-16) are sand and salt disc spreaders for tractors. Volume 0.5–1.6 m³, spreading width 2–8 m and hydraulic drive.
Three-point mounted spreaders for tractors
3-point/front-mounted spreaders for tractors. Falköping R series R-3H, R-5H and R-7H with hydraulic drive, volume 0.3–0.7 m³ and spreading width 1–2 m.
Spreader buckets for tractors
Falköping spreader buckets S-3 to S-25 for three-point linkage on large and small tractors, front- or rear-mounted. Volume 0.3–2.5 m³, spreading width 1–2.5 m.
Spreader buckets for wheel loaders
Falköping spreader buckets S-11LM, S-20LM and S-25LM for larger and smaller wheel loaders. Volume 1.1–2.5 m³, spreading width 2–2.5 m.
Trailed spreaders for tractors
The Falköping T series T-12, T-15 and T-20 are trailed spreaders for tractors. Volume 1.2–2.0 m³, for sand and salt, spreading width 1.3–2.1 m.
Trailed spreaders for compact machines
The Falköping T series T-2.5, T-6 and T-7 are trailed spreaders for small tractors. Volume 2.5–7 hl, for sand and salt, spreading width 1–1.4 metres.
Spreaders for forklifts
The Falköping H-5 and H-7 are drop spreaders for forklifts: 500 or 700 litres, 1.5 or 2 m spreading width, ground-wheel drive. Spreads sand, gravel and salt.
Nozzle spreading
Nozzle spreading (high-speed spreading) lets you spread at up to 80–90 km/h compared with 60 km/h with the disc alone, giving shorter treatment times and less traffic congestion. Available on combination and liquid spreaders, and can be retrofitted.
Control systems for C, CL, CLC and TC spreaders
Control units for Falköping spreaders in the C, CL, CLC and TC series, with several options for operating the spreader from the driver's seat.
Data collection
Collection, transfer, processing and reporting of spreader data from Falköping spreaders. Documents who, what, where, when and under which conditions the treatment was carried out.
About Falköping
Falköping spreaders are produced by the family-owned company Friggeråkers Verkstäder AB in Falköping, Sweden. The company was founded in 1937 and the first sand spreader was produced in 1957. Friggeråkers Verkstäder and Stave have worked together for more than 50 years.
Falköping spreaders are produced in the Nordic region and are adapted to Nordic conditions, with long winters and frequent treatments. Norway is one of Falköping's main markets, and several adaptations are made for the Norwegian market.
Award for the manufacturer
Many Norwegian spreader customers know Christer, the man behind every part of Falköping. At the NordicWay2011 Winter Congress in Östersund, he was awarded the Winter Prize of SEK 20 000, along with honour and glory. The citation reads:
“With the Winter Prize, the industry group for operation and maintenance wishes to recognise Christer Friggeråker and Friggeråkers Verkstäder, who through their business have made a significant contribution to the field of winter road maintenance. The work is of great importance with regard to technological development, road safety, accessibility and the environment.”
The industry group consists of Trafikverket, Skanska, Peab, NCC and Svevia.
As the importer of Falköping spreaders for more than 50 years, we at Sigurd Stave Maskin AS endorse the industry group's conclusion and would stress that the prize is more than well deserved.
Parts and service for Falköping
The workshop and parts warehouse are under the same roof at Jeksleveien 22, 2016 Frogner, and the most commonly used parts are normally dispatched the same or the next working day.
Need help choosing the right machine?
Get in touch for advice, prices and availability — we respond quickly.