Disc spreaders with pre-wetting
- Volume
- 3 m³, 5 m³, 6 m³, 7 m³
- Hydraulic pressure, min.
- 150 bar
- Spreading material
- Sand
- Spreading width
- 2-8 m
Falköping C-3, C-5, C-6 and C-7 disc spreaders with pre-wetting. Volume 3–7 m³, spreading width 2–8 m, hydraulic drive.
- Volume 3 m³, 5 m³, 6 m³, 7 m³
- For sand and salt
- Spreading width 2-8 m
- Hydraulic drive
- Emergency operation function
- Infinitely variable and synchronised width and rate setting
About the disc spreaders with pre-wetting
Falköping C-3, C-5, C-6 and C-7 with pre-wetting. The pre-wetting equipment automatically reduces the amount of salt by 30%. The liquid is held in an insulated or uninsulated front tank or in side tanks, with a lowered filling point and overfill protection. The pre-wetting equipment holds 1.8 m³ of liquid and adds 200 kg to the weight. Choice of control unit.
Falköping spreaders can be supplied factory-mounted on a trailer, or placed in a separate trailer.
Standard equipment: Zinc-metallised, primer and 2-component topcoat. Cover. Quick-loading system.
Optional equipment: Remote control of spread pattern (hydraulic), hydraulic disc lift, ground-wheel drive, engine drive, exhaust heating, frame for hook lift, extra hard-wearing augers for extensive sand spreading, data collection.
More features
- Ground-speed dependent
- Quick emptying
- Easy calibration
- Prepared for data collection
- Twin feed augers for reliable discharge – can be run together or separately, and can be reversed in the event of a blockage
Documents
- 📄 Mixer and the slurry method (PDF)
- 📄 Older disc spreader brochure (Swedish) (PDF)
- 📄 Technical specification C-3, C-5, C-6 and C-7 (Swedish) (PDF)
- 📄 Disc spreader brochure (Swedish) (PDF)
- 📄 Disc spreader brochure (English) (PDF)
Spreading methods and equipment
C-7BF Pre-wetting spreaderC-7BFI Insulated pre-wetting spreader
| C-7BFPre-wetting spreader | C-7BFIInsulated pre-wetting spreader | |
|---|---|---|
| Can spread | ||
| Dry salt | ✓ | ✓ |
| Salt pre-wetted with brine | ✓ | ✓ |
| Salt pre-wetted with water | – | ✓ |
| Slurry (fine-grained pre-wetted salt) | ✓ | ✓ |
| Sand | ✓ | ✓ |
| Vehicle and mounting | ||
| 3-axle truck | ✓ | ✓ |
| 4-axle truck | ✓ | ✓ |
| Tipper body | ✓ | ✓ |
| Hook lift | ✓ | ✓ |
| Subframe | ✓ | ✓ |
| Feeding and spreading | ||
| TwinFeed, two discharge augers | ✓ | ✓ |
| Hydraulic disc lift | ✓ | ✓ |
| Hydraulic cover | ✓ | ✓ |
| Agitator | ✓ | ✓ |
| Auger relief | ✓ | ✓ |
| Extra hard-wearing feed augers in Hardox | ✓ | ✓ |
| Mixer for slurry | ✓ | ✓ |
| Hopper and tank | ||
| Mesh over the material hopper | ✓ | ✓ |
| Fold-up railing | ✓ | ✓ |
| Extension for more dry material | ✓ | ✓ |
| Larger or additional tanks for more liquid | ✓ | ✓ |
| Control and data | ||
| LS control | ✓ | ✓ |
| Data capture | ✓ | ✓ |
| GPS-controlled spreading | ✓ | ✓ |
| Prepared for forecasting tools (BM-systems, Klimator, Ahead, Vaisala) | ✓ | ✓ |
C-7BFI: Frost-proof. The equipment is optional. We can help you put together what suits the vehicle and the job.
Also known as: Sand spreader, disc spreader, sand, spreader, salt spreader, dry spreader, sand gritter
Related products
Disc spreaders, dry
Falköping C-3, C-5, C-6 and C-7 disc spreaders for dry salt and sand. Volume 3–7 m³, spreading width 2–8 m, hydraulic drive.
Falköping K-60 wheelbarrow spreader
Manual gritting cart for sand, fine gravel, salt and calcium chloride. The Falköping K-60 holds 60 litres, spreads 0.6 m wide and doubles as a wheelbarrow.
Disc spreaders for smaller vehicles
Falköping C-06, C-1, C-1.5 and C-2 are sand and salt disc spreaders for smaller vehicles, with volumes from 0.6 to 2 m³ and a spreading width of 2–8 m. The C-2MB is adapted for the Mercedes MB-Trac.
Data collection
Collection, transfer, processing and reporting of spreader data from Falköping spreaders. Documents who, what, where, when and under which conditions the treatment was carried out.
Need help choosing the right machine?
Get in touch for advice, prices and availability — we respond quickly.