Falköping's disc spreaders spread sand, fine gravel, salt and calcium chloride. They are fitted to trucks or driven by the tractor's hydraulics, spread 2–8 metres wide and are available with pre-wetting, which according to Falköping reduces the amount of salt by 30%.
The C-06 to C-2 are made for smaller trucks, the C-3 to C-7 take 3–7 m³ dry or with pre-wetting, the CLC spreads salt and solution, and the TC runs on the tractor's hydraulics.
Falköping C-06, C-1, C-1.5 and C-2 are sand and salt disc spreaders for smaller vehicles, with volumes from 0.6 to 2 m³ and a spreading width of 2–8 m. The C-2MB is adapted for the Mercedes MB-Trac.
Falköping C-3, C-5, C-6 and C-7 disc spreaders for dry salt and sand. Volume 3–7 m³, spreading width 2–8 m, hydraulic drive.
Falköping C-3, C-5, C-6 and C-7 disc spreaders with pre-wetting. Volume 3–7 m³, spreading width 2–8 m, hydraulic drive.
The Falköping CLC series are combination spreaders that spread liquid and dry material (sand and salt) together or separately. Models CLC-366 to CLC-857 with a spreading width of 2–8 m (up to 13 m with high-speed nozzles) and hydraulic drive.
The Falköping TC series (TC-05, TC-10, TC-16) are sand and salt disc spreaders for tractors. Volume 0.5–1.6 m³, spreading width 2–8 m and hydraulic drive.
The figures are Falköping's own, from the disc spreader brochure (2026). The brochure has footnotes and dimensions for each model.
| Series | Models | Volume | Unladen weight | Spread rate | Spreading width | Hydraulics |
|---|---|---|---|---|---|---|
| C series, small | C-06, C-1, C-1.5, C-2 | 0.6–2.0 m³ | 200–350 kg | Salt 5–30 g/m² Sand 50–200 g/m² | 2–8 m | Min. 20, max. 60 l/min Min. 150 bar |
| C series, large | C-3, C-5, C-6, C-7 | 3.0–7.0 m³ | 1 000–1 500 kg | Salt 5–30 g/m² Sand 50–200 g/m² | 2–8 m Special model 3–12 m | Min. 30/40, max. 60 l/min Min. 150 bar |
| CLC combination spreader | CLC-366, CLC-427, CLC-546, CLC-647, CLC-857 | Solution 3.6–8.5 m³ Salt 6.0–7.0 m³ | 1 700–2 300 kg | Salt 5–30 g/m² Solution 5–40 g/m² | 2–8 m Special model 3–12/13 m | Min. 40, max. 60 l/min Min. 150 bar |
| TC tractor spreader | TC-05, TC-10, TC-16 | 0.5–1.6 m³ | 310–430 kg | 5–200 g/m² | 2–8 m | 30–60 l/min Over 150 bar |
The C, CL and CLC series have an operating voltage of 12 or 24 V. The C-06 to C-2 have one feed auger, while the C-3 to C-7 and CLC have two. The CLC spreads at up to 60 km/h. The spreaders are zinc-metallised, primed and painted with 2-component topcoat.
Pre-wetting. The salt is wetted with solution from an insulated or uninsulated front tank, or from side tanks with a lowered filling point and overfill protection. According to Falköping, this automatically reduces the spread quantity by 30%.
Mixer. The mixer makes salt slurry in the spreader. The wetting liquid is whipped into the salt, the grains become smaller, and salt and liquid become an even mixture. The spreader in the picture has a mixer. It is available on the C-3 to C-7, on the combination spreaders in the CLC series and on the TC spreaders.
Infinitely variable and synchronised setting of width and rate, spreading in step with the driving speed and feedback-controlled feed augers. The panel has spreading monitoring with indicator lights, a quantity counter and quick emptying, and is calibrated with a built-in tacho function.
The control systemsWith GPS-controlled spreading, the routes are programmed in advance, and the program controls rate, width and symmetry while the driver gets directions on the screen and by voice. IR automation doses salt and solution according to the road surface temperature, with four dosing curves.
Data collectionThe combination spreaders in the CLC series can be fitted with spreading nozzles in addition to the disc. The nozzles engage automatically when the truck drives faster, the spread pattern is maintained, and the spreading width can be up to 13 metres.
High-speed spreadingThe spreaders are made by the family-owned company Friggeråkers Verkstäder AB in Falköping, Sweden, founded in 1937. The first sand spreader was made in 1957 and the first salt spreader in 1983.
The factory covers around 6 500 m², has 40 employees and makes about 500 sand and salt spreaders a year. The machines are CE-marked. Sigurd Stave Maskin has been the importer of Falköping spreaders for more than 50 years.
Sand, fine gravel, salt and calcium chloride. The combination spreaders in the CLC series also spread brine, either on its own or mixed with salt.
The spreading width is 2–8 metres on the C, CLC and TC series. The C-3 to C-7 are available as a special model with 3–12 metres and the CLC with 3–12/13 metres. With high-speed spreading, the combination spreaders can spread up to 13 metres.
Falköping states that the pre-wetting equipment automatically reduces the amount of salt by 30%. All the salt spreaders in the C series are available with pre-wetting, and the TC spreaders have it as an option.
Salt slurry is fine-grained, pre-wetted salt that is made in the spreader. The mixer whips the wetting liquid into the salt, makes the grains smaller and gives an even mixture of salt and liquid. Falköping states max. 15 g/m², little salt loss and a relatively large salt reserve on the road surface. The slurry method cannot be run dry.
As standard, the spreader is driven by the truck's hydraulics. A petrol or diesel engine drive is available as an add-on, and the spreader can still be driven by the truck hydraulics when the engine is fitted.
At least 150 bar. At 1 000 rpm, the C-06 to C-2 need at least 20 l/min, the C-3 to C-7 at least 30–40 l/min and the CLC at least 40 l/min, with a max. of 60 l/min for all. The TC spreaders need 30–60 l/min and over 150 bar from the tractor. The operating voltage is 12 or 24 V for the C, CL and CLC spreaders.
Get in touch for advice, prices and availability — we respond quickly.